isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Wiper Motor|Service and Repair|Page 5955 > < Wiper Gear Box|Service and Repair|Page 5951
Page 1
background image

Wiper Motor: Service and Repair

Removal Procedure

Tools Required

J39232 Wiper Transmission Separator

1. Remove the wiper arms. Refer to Wiper Arm Replacement.
2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.

3. Remove the transmission from the wiper motor drive link using the J 39232.
4. Disconnect the electrical connector from the wiper motor.
5. Remove the three screws and wiper motor from the vehicle.

Installation Procedure

Tools Required

J39529 Wiper Transmission Installer

NOTE:  Refer to Fastener Note in Cautions and Notes.

Wiper Motor|Service and Repair|Page 5955 > < Wiper Gear Box|Service and Repair|Page 5951