isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Coolant Reservoir > < Coolant Line/Hose|Specifications|Page 1294
Page 2
background image

3. Connect the radiator outlet hose to the coolant pump.

Connect the radiator inlet hose to the coolant outlet.

NOTICE:  Refer to Fastener Notice in Service Precautions. See: Service Precautions/Vehicle Damage Warnings

4. If service type radiator hose clamps are used:

Tighten

Tighten the radiator hose clamps to 2.5 Nm (22 inch lbs.).

5. Refill the cooling system to the proper level. Refer to Draining and Filling Cooling System.
6. Check the cooling system for leaks. Refer to Cooling System Leak Testing.

Coolant Reservoir > < Coolant Line/Hose|Specifications|Page 1294