Hombre XS Regular Cab 2WD L4-2.2L CPC (1998)
Measure from the bumper bracket down to the top of the rear axle housing tube. Trim D heights at or between 131.5-161.5 mm (5.2-6.4 inch).
D HEIGHT JOUNCE METHOD
Measure the D height using the following procedure:
1. Lift the rear bumper of the vehicle up about 38 mm (1.5 inch).
2. Gently remove your hands. Let the vehicle settle by itself.
3. Repeat the jounce operation two more times for a total of three times.
4. Measure the D dimension.
5. Push the front bumper of the vehicle down about 38 mm (1.5 inch).
6. Gently remove your hands. Let the vehicle rise by itself.
7. Repeat the jounce operation two more times for a total of three times.
IMPORTANT: True trim height is the average of the high and low measurements.
8. Measure the D dimension.
9. Find the average of the high and low measurements. This is the true D dimension.