Hombre XS Regular Cab 2WD L4-2.2L CPC (1998)
seat.
-
Also, finger apply a small amount of grease inboard of each bearing cup in the rotor.
-
Pressure pack the bearings with a grease machine, or hand pack the bearings. Make sure the grease is worked thoroughly into the rollers, the
cone, and the cage.
1. Install the inner bearing to the rotor.
2. Apply an additional quantity of grease outboard of the inner bearing.
3. Install the seal.
-
3.1. Lubricate the seal lip.
-
3.2. Use a flat plate in order to press the seal down flush with the hub.
-
3.3. Seat the outer bearing and the cup.
IMPORTANT: Do not scuff the spindle threads.
4. Install the rotor to the spindle.
5. Install the outer bearing to the rotor.
6. Install the washer.
IMPORTANT: Adjust the wheel bearings.
7. Install the nut.
8. Tighten
-
8.1. Tighten the nut to 16 Nm (12 ft. lbs.), while turning the wheel assembly forward by hand.
-
8.2. Apply grease to the outboard side of the outer bearing.
9. Install the brake caliper.
10. Lower the vehicle.
