Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
5. Install the cable end fitting into the parking brake lever.
2. Install the brake shoes and drum(s).
Important: When routing the cable(s) through the guide loop, route the left side cable first.
3. Route the rear cable(s) through the attachments and guides at the frame and/or axle and/or equalizer.
4. Verify the cable retainers fingers expanded and the retainers are secure at all locations for cable(s) removed.
5. Strap the right rear park brake cable tight against the rear axle.
1. Tighten the strap so it does not move along the rear axle.
2. Secure the loose end of the strap back through the tabs in the buckle.
6. Adjust the park brake.
Refer to Adjustments.
7. Lower the vehicle.
