Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
3. Tighten the bolt until both locking wings draw tight against the inner wall of the engine block.
Tighten the bolt to 1.9 N.m (17 lb in).
Important: The heater cord must not touch the following components:
-
The engine
-
The hot pipes
-
The manifold
-
Any moving components
4. Install the heater cord to the coolant heater.
5. Route the heater cord.
6. Fill the reservoir with engine coolant.
7. Inspect the system for leaks.
