Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Drive Belt Tensioner: Service and Repair
Drive belt Tensioner Replacement
Removal Procedure
Notice: Allowing the drive belt tensioner to snap into the free position may result in damage to the tensioner.
1. From under the vehicle, remove the drive belt. Refer to Drive belt; Service and Repair.
See: Drive Belt/Service and Repair
2. Remove the drive belt tensioner assembly bolt.
3. Remove the drive belt tensioner assembly.
Installation Procedure
1. From under the vehicle, install the drive belt tensioner assembly and bolt to the engine.
Ensure that the pin on the tensioner fits into the locating hole on the engine front cover.
Tighten the drive belt tensioner bolt to 50 N.m (37 lb ft).
2. Install the drive belt. Refer to Drive belt; Service and Repair.