Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Oil Pressure Sensor: Service and Repair
Removal Procedure
Tools Required
J 41712 Oil Pressure Sending Unit Socket
CAUTION: Refer to Vehicle Lifting Caution in Service Precautions.
1. Raise the vehicle.
2. Disconnect the electrical connector.
3. Remove the engine oil pressure sensor (1) using J 41712 Oil Pressure Sending Unit Socket.
Installation Procedure
NOTE: Refer to Fastener Note in Service Precautions.
1. Install the engine oil pressure sensor (1) using J 41712.
Tighten
Tighten the engine oil pressure sensor to 12 N.m (106 lb in).
2. Connect the electrical connector.
3. Lower the vehicle.
