Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
8. Remove the heated oxygen sensors (HO2S) as necessary.
Installation Procedure
1. Install the heated oxygen sensors (HO2S) as necessary.
2. Install the catalytic converter and new gasket to the exhaust manifold pipe.
3. Install catalytic converter to the catalytic converter hanger.
Figure 4-Rear of Converter to Muffler
4. Install the muffler and new gasket to the catalytic converter.
5. Install the catalytic converter to the exhaust manifold pipe flange nuts.
Tighten the catalytic converter to the exhaust manifold pipe flange nuts to 35 N.m (26 lb ft).
6. Install the catalytic converter to the muffler flange nuts.
Tighten the catalytic converter to the muffler flange nuts to 35 N.m (26 lb ft).
