Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Fuel Pressure Release: Service and Repair
CAUTION: Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury.
After relieving the system pressure, a small amount of fuel maybe released when servicing the fuel lines or connections. In order to reduce the chance of
personal injury, cover the regulator and the fuel line fittings with a shop towel before disconnecting. This will catch any fuel that may leak out Place the
towel in an approved container when the disconnection is complete.
Tool Required
J 34730-1A Fuel Pressure Gauge
1. Turn the ignition OFF.
2. Disconnect the negative battery cable in order to avoid possible fuel discharge if an accidental attempt is made to start the engine.
3. Loosen the fuel filler cap in order to relieve the fuel tank vapor pressure.
4. Connect the J 34730-1A fuel pressure gauge to the fuel pressure connection. Wrap a shop towel around the fitting while connecting the gauge in
order to avoid spillage.
5. Install the bleed hose of the gauge into an approved container.
6. Open the valve on the gauge to bleed the system pressure.
7. Drain any fuel remaining in the fuel pressure gauge into an approved container.
