Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
ISUZU does not provide a procedure for clearing diagnostic trouble codes with a generic scan tool.
With TECH 2
You may NOT clear a DTC from the memory of the BCM by performing either of the following actions:
-
Disconnecting the battery
-
Disconnecting the BCM electrical connectors
Perform one of the following steps in order to clear a DTC from the memory of the BCM:
-
Use the scan tool.
-
Perform 100 concurrent ignition cycles without the fault recurring.
You must clear the DTCs from the BCM after performing a repair. You may also clear the DTCs from the BCM in order to ensure that a malfunction
will not occur again. If the fault still exists, the DTC will reset after clearing the DTCs. If any current non-Passlock (TM) system related DTCs exist,
diagnose those DTCs before clearing the Passlock (TM) DTCs. When the Passlock (TM) DTCs are cleared, the BCM DTCs will also be cleared.
