Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Engine Control Module: Service and Repair
General Instruction
NOTE: In order to prevent internal damage to the PCM, the ignition must be OFF when disconnecting or reconnecting the PCM connector.
Service of the PCM should normally consist of either replacement of the PCM or EEPROM re-programming.
If the diagnostic procedures call for the PGM to be replaced, the PCM should be checked first to see if it is the correct part. DTC P0601 indicates the
EEPROM programming has malfunctioned. When DTC P0601 is obtained, re-program the EEPROM.
NOTE: In order to prevent internal damage to the PCM, the ignition must be OFF when disconnecting or reconnecting the PCM connector.
The ignition should be OFF for at least 10 seconds before disconnecting power to the PCM so the IAC valve has time to move to the engine OFF
position.
