Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Fuel Line Coupler: Service and Repair
Plastic Collar
REMOVAL
1. Grasp both sides of the quick-connect fitting. Twist the female connector 1/4 turn in each direction in order to loosen any dirt within the
quick-connect fitting.
2. CAUTION: Wear safety glasses when using compressed air in order to prevent eye injury.
Using compressed air, blow any dirt out of the quick-connect fitting.
3. Squeeze the plastic retainer release tabs
4. Pull the connection apart.
INSTALLATION
CAUTION: In order to reduce the risk of fire and personal injury, before connecting fuel pipe fittings, always apply a few drops of clean engine oil to
the male pipe ends.
This will ensure proper reconnection and prevent a possible fuel leak.
During normal operation, the O-rings located in the female connector will swell and may prevent proper reconnection if not lubricated.
1. Apply a few drops of clean engine oil to the male fuel pipe end.
2. Push both sides of the quick-connect fitting together in order to cause the retaining tabs/fingers to snap into place.
3. Once installed, pull on both sides of the quick-connect fitting in order to make sure the connection is secure.