Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
valve.
INSTALLATION
1. Lubricate IAC valve O-ring (3) with clean engine oil.
2. Install the IAC valve assembly (2).
NOTE: Refer to Fastener Note in Service Precautions.
3. Install the IAC valve attaching screws (1).
Tighten
Tighten the IAC valve attaching screws to 3.0 N.m (27 lb in).
4. Install the electrical connector.
5. To reset the IAC valve pintle position:
1. Turn the ignition switch to the ON position (engine OFF).
2. Turn the ignition switch OFF for ten seconds.
3. Start the engine and check for proper idle operation.