Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
6. Install the electrical connector to IAC sensor
7. Install the electrical connector to TP sensor.
8. Install the air cleaner resonator to the throttle Body.
9. IMPORTANT: With the engine OFF, check to see that the accelerator pedal is free, by depressing the pedal to the floor and releasing.
Connect the negative battery cable.
10. Reset IAC valve pintle position:
1. Turn the ignition switch to the ON position.
2. Turn the ignition switch to the OFF position for ten seconds.
3. Start the engine and check for proper idle operation.