Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Throttle Cable/Linkage: Service and Repair
Accelerator Controls Cable Bracket
REMOVAL
1. Remove the accelerator, cruise and transmission cables, (If so equipped).
2. Remove the accelerator cable bracket attaching bolt (2) and the accelerator cable bracket (1).
INSTALLATION
1. Install the accelerator cable bracket (1) with attaching bolt (2).
NOTE: Align the accelerator bracket with the accelerator cam in order to prevent cable wear which could cause the cable to break.
2. NOTE: Refer to Fastener Note in Service Precautions.
Install the bolt to the accelerator bracket.
Tighten
Tighten the bolt to 10 N.m (89 lb in).
