Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Crankshaft Position Sensor: Service and Repair
Removal and Installation
REMOVAL
1. Raise the vehicle. Refer to Vehicle Lifting Caution in Service Precautions.
2. Remove the Crankshaft position (CKP) sensor harness connector at the module.
3. Remove the CKP sensor mounting bolt (2).
4. Remove the CKP sensor from the engine (1).
5. Inspect the CKP sensor O-ring for wear, cracks or leakage. Replace if necessary.
INSTALLATION