isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Knock Sensor|Locations|Page 898

Hombre XS Space Cab 2WD L4-2.2L CPC (1999)

Page 2
background image

NOTE:  Refer to Fastener Note in Service Precautions.

1. After cleaning the threads thoroughly, install the knock sensor into the engine block. 

Tighten
Tighten the knock sensor to 19 N.m (14 lb ft).

2. Install the KS wiring harness connector to the knock sensor.
3. Lower the vehicle.
4. Connect the negative battery cable.

Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor] > < Knock Sensor|Locations|Page 898