isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Oxygen Sensor > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 909

Hombre XS Space Cab 2WD L4-2.2L CPC (1999)

Page 1
background image

Oil Pressure Sensor: Service and Repair

Removal Procedure

Tools Required

J 41712 Oil Pressure Sending Unit Socket

CAUTION:  Refer to Vehicle Lifting Caution in Service Precautions.

1. Raise the vehicle.
2. Disconnect the electrical connector.
3. Remove the engine oil pressure sensor (1) using J 41712 Oil Pressure Sending Unit Socket.

Installation Procedure

NOTE:  Refer to Fastener Note in Service Precautions.

1. Install the engine oil pressure sensor (1) using J 41712.

Tighten
Tighten the engine oil pressure sensor to 12 N.m (106 lb in).

2. Connect the electrical connector.
3. Lower the vehicle.

Oxygen Sensor > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 909