isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Starter Motor|Locations|Page 4195 > < Starter Motor|Locations
Page 1
background image

Starter Motor: Service and Repair

Removal Procedure

CAUTION:  Refer to Battery Disconnect Caution in Service Precautions.

NOTE:  Never operate the starter motor for more than 30 seconds at a time. Allow it to Cool for at least two minutes. Overheating, caused by too much
cranking, will damage the starter motor.

1. Disconnect the battery negative cable.
2. Remove the exhaust manifold pipe. 

3. Remove the engine to transmission brace rod mounting bolts.
4. Remove the engine to transmission brace rod.

5. Remove the starter heat shield.

Starter Motor|Locations|Page 4195 > < Starter Motor|Locations