Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
5. Install the brush end bracket mounting bolt to the engine. Do not tighten the bolt.
6. Install the outboard starter mounting bolt.
Tighten
Tighten the starter motor and the brush end bracket attaching bolts to 43 N.m (32 lb ft).
7. Connect the wires to the starter solenoid.
Tighten
-
Tighten the battery positive cable to starter nut to 9 N.m (80 lb in).
-
Tighten the engine wiring harness to starter nut to 1.9 N.m (17 lb in).
8. Install the starter heat shield.