Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
5. Remove the pitman arm from steering gear using J 6632-01 or J 29107-A.
6. Inspect the ball stud threads for damage.
7. Inspect the ball stud seals for excessive wear.
8. Clean the threads on the ball stud.
Installation Procedure
Tools Required
-
J 29193 Steering Linkage Installer (12 mm).
-
J 29194 Steering Linkage Installer (14 mm).
1. Install the pitman arm to the pitman arm shaft.
2. Install the pitman arm washer and nut to the pitman arm shaft.
Tighten
Tighten the pitman arm shaft nut to 250 N.m (185 lb ft).
3. Install the relay rod ball stud to the pitman arm.
Ensure the seal is on the stud.