Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
2. Install the inner tie rod ball stud to the relay rod.
Ensure that the seal is on the stud.
3. Seat the taper using J 29193 or J 29194.
Tighten
Tighten J 29193 or J 29194 to 54 N.m(40 lb ft).
4. Remove J 29193or J 29194 from inner tie rod ball stud.
5. Install the new nut to the inner tie rod ball stud.
Tighten
Tighten the inner tie rod ball stud nut to 47 N.m (35 lb ft).
6. Connect the outer tie rod ball stud to the steering knuckle.
Ensure that the seal is on the stud.
7. Seat the taper using J 29193 or J 29194.
Tighten
Tighten J 29193 or J 29194 to 54 N.m(40 lb ft).
8. Remove J 29193or J 29194 from outer tie rod ball stud.
9. Install the nut to the outer tie rod ball stud.
