Hombre XS Space Cab 2WD L4-2.2L CPC (1999)
Front Steering Knuckle: Service and Repair
Steering Knuckle Replacement (RWD)
Removal Procedure
Tools Required
-
J 23742 Ball Joint Separator
-
J 24319-B Universal Steering Linkage Puller
-
J 6627-A Tie Rod Puller
Caution: Floor jack must remain under the lower control arm during removal and installation to retain the lower control arm in position. Failure to do
so could result in personal injury.
1. Raise the vehicle.
-
Support the lower control arm with floor stands.
-
Place floor stands under the lower control arms as far outboard as possible (between spring seats and ball joint) to maintain maximum
leverage.
2. Remove the rotor. Refer to Wheel Hub, Bearing, and Seal Replacement (RWD).
3. Remove the bolts that attach the splash shield to the steering knuckle.
