Hombre XS Space Cab 2WD V6-4.3L (1998)
1. Install the linings.
2. Install the caliper housing over the rotor and into the anchor bracket.
NOTICE: Refer to Fastener Notice in Cautions and Notices.
3. Install new upper caliper mounting bolt.
Tighten
Tighten the bolt to 31 Nm (23 ft. lbs.).
4. Install a new lower mounting bolt.
Tighten
Tighten the bolt to 31 Nm (23 ft. lbs.).
NOTICE: Make sure the brake hose is not twisted or kinked after installation. Damage to the hose could result.
