isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Coolant Line/Hose|Service and Repair|Page 1293 > < Coolant Drain Plug, Cylinder Block|Specifications
Page 1
background image

Coolant Line/Hose: Service and Repair

REMOVAL PROCEDURE 

CAUTION:  As long as there is pressure in the cooling system, the temperature can be considerably higher than the boiling temperature of the
solution in the radiator without causing the solution to boil. removal of the radiator cap while the engine is hot and pressure is high will cause the
solution to boil instantaneously-possibly with explosive force-spewing the solution over the engine, fenders and the person removing the cap.
Under some conditions, the ethylene glycol in the engine coolant is combustible.

1. Remove the coolant from the radiator until the level is below the hoses being removed. Refer to Draining and Filling Cooling System
2. Loosen the radiator hose clamps.

3. Disconnect the radiator hoses from the radiator.

4. Disconnect the upper radiator inlet hose from the coolant outlet.

Coolant Line/Hose|Service and Repair|Page 1293 > < Coolant Drain Plug, Cylinder Block|Specifications