Hombre XS Space Cab 2WD V6-4.3L (1998)
3. Install the following fasteners to the oil seal housing:
-
Three screws using a T27 Torx wrench and one nut.
-
Two lower studs using an E7 Torx wrench.
Tighten
-
Tighten the crankshaft rear oil seal housing screws and nut to 12 Nm (106 inch lbs.).
-
Tighten the lower studs to 6 Nm (53 inch lbs.).
4. Install the transmission assembly and the flywheel.
Refer to Transmission Replacement.
