Hombre XS Space Cab 2WD V6-4.3L (1998)
Balance Shaft: Service and Repair
REMOVAL PROCEDURE
1. Remove the radiator.
Refer to Radiator Replacement in Engine Cooling.
2. Remove the a/c condenser, if equipped.
Refer to Condenser Replacement in HVAC.
3. Remove the engine front cover and the crankshaft position reluctor ring.
Refer to Engine Front Cover Replacement.
4. Loosen the balance shaft driven gear bolt using the following steps:
4.1. In order to hold the camshaft sprocket, use a wrench on one of the bolts.
4.2. Loosen, then remove the balance shaft bolt and the washer.
4.3. Remove the wrench from the camshaft sprocket.
