Hombre XS Space Cab 2WD V6-4.3L (1998)
Description
Description
9. Install the roll pin to hold the driven gear in the correct position. Wear safety goggles.
10. Install the rotor according to the index marks.
11. As shown, the number 2 is the rotor mounting holes and the number 1 is the locating holes.
12. Install the two rotor hold down screws.
Tighten
^
Tighten the screws to 2.5 Nm (25 lb. in).
13. Install the distributor in the engine, with the cap off.
14. Install the bolt in the hold down lug.
Tighten
^
Tighten the bolt to 27 Nm (20 lb. ft).