Hombre XS Space Cab 2WD V6-4.3L (1998)
4. Turn the center forcing screw of the J 8433-1 puller crossbar to force the clutch coil onto the front head. Be sure clutch coil and J 33024 installer
stay "in-line" during installation.
5. When Coil is fully seated on the front head, use a 118" diameter drift punch and stake the front head at three places 120 degrees apart, to ensure
clutch coil remains in position.
-
Stake size should be only one-half the area of the punch tip and be only approximately 0.28-0.35 mm (.010-.015") deep.
6. Install rotor and being assembly and the clutch plate and hub assembly as described previously.