isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Audible Warning Device|Testing and Inspection > < Diagram Information and Instructions|Page 4478
Page 1
background image

Audible Warning Device: Description and Operation

With the ignition switch in START or RUN, voltage is supplied to the body control module (BCM) through fuse 4 and the CKT 39 (PNK) wire and fuse
3 and the CKT 41 (BRN) wire.

SAFETY BELT REMINDER

The chime will sound for 6 seconds when the ignition switch is turned from the OFF position to the RUN position and the seat belt is unfastened. The
seat belt reminder on the IPC will also turn on.

KEY-IN REMINDER

The chime will sound when the ignition switch is not in the RUN or CRANK position, the ignition key is in the ignition key cylinder, and the drivers
door is open.

HEAD LAMP REMINDER

The chime will sound when the head lamp switch is in the PARK or READ position, the IP dimming switch is not at the maximum dimming state, and
the ignition switch is in the OFF or ACC position.

TURN SIGNAL REMINDER

The chime will sound when the right or left turn signal is turned on for more than 0.75 miles. the chime will be synchronous with the turn signal flasher.

Audible Warning Device|Testing and Inspection > < Diagram Information and Instructions|Page 4478