Hombre XS Space Cab 2WD V6-4.3L (1998)
8. As the distributor is being removed from the engine, you will notice the rotor move in a counter-clockwise direction, 42 degrees. This will appear
as slightly more than one clock position. Noting the position of the rotor segment, by placing a second mark on the base of the distributor, will aid
in achieving proper rotor alignment during the distributor installation. Identify the second mark on the base with the number 2.
INSTALLATION PROCEDURE A
Distributor: Installation Procedure A
1. Remove the new distributor cap.
2. Using a grease pencil, place two marks on the new distributor housing in the same location as the two marks on the original housing.
3. When installing the distributor, align the rotor segment with the number 2 mark on the base of the distributor.
