isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Exterior Lighting Module > < Compressor Clutch Relay|Service and Repair
Page 1
background image

Daytime Running Lamp Relay: Service and Repair

Remove or Disconnect

1. Make sure the headlamp switch is in the OFF position and the ignition switch is in the LOCK position
2. Open the hood.
3. Protective cover from the underhood bussed electrical center.
4. DRL relay from the underhood bussed electrical center. Refer to Power Distribution in Electrical Diagnosis.

Install or Connect

1. DRL relay to the underhood bussed electrical center.
2. Protective cover to underhood bussed electrical center.
3. Close the hood.

Exterior Lighting Module > < Compressor Clutch Relay|Service and Repair