Hombre XS Space Cab 2WD V6-4.3L (1998)
3. Install the Connector Position Assurance (CPA) to the passenger yellow 2-way connector located behind the glove box.
4. Connect the driver yellow 2-way connector located at the base of the steering column.
5. Install the Connector Position Assurance (CPA) to the driver yellow 2-way connector located at the base of the steering column.
6. Install the knee bolster.
7. Install the sound insulator-LH (if equipped).
8. Install the SIR Fuse to the IP fuse block.
9. Staying well away from both air bags, turn the ignition switch to the RUN position.
9.1.
The AIR BAG warning lamp will flash seven times.
9.2.
The AIR BAG warning lamp will then turn OFF.
10. Perform the SRS Diagnostic System Check See: Testing and Inspection/Component Tests and General Diagnostics/SRS Diagnostic System Check
if the AIR BAG warning lamp does not operate as described.
