Hombre XS Space Cab 2WD V6-4.3L (1998)
15. Twist together, bend, and tape the remaining connector wire lead to the remaining deployment wire.
16. Connect the deployment harness to the supplemental restraint steering wheel module yellow 2-way connector.
17. Route the deployment harness out of the vehicle's driver side.
18. Disconnect the supplemental restraint IP module yellow 2-way harness connector.
19. Cut the harness connector out of the vehicle, leaving at least 16 cm (6 in) of wire at the connector.
20. Strip 13 mm (0.5 in) of insulation from each of the connector wire leads.