isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Knee Diverter > < Warning Lamp Comes "ON" Steady|Page 4184
Page 4
background image

Airbag Warning Lamp Does Not Come On (Part 3 Of 3)

Test Description

The numbers below refer to the step numbers on the diagnostic table:

2. This test determines whether the malfunction is in the supplemental restraint Sensing and Diagnostic Module (SDM) circuitry or in the instrument

cluster power feed circuitry.

3. This test determines whether voltage is present in the warning lamp circuit.
4. This test isolates CKT 358 and checks for a short in CKT 358 to B+.
6. This test determines if the malfunction is in the instrument cluster connector.
8. This test determines if the open is due to a bad instrument cluster or an open in the warning lamp circuitry.

11. This test checks whether power is available to the instrument cluster power feed circuit.
12. This test checks for a short from the instrument cluster power feed circuit to ground.
13. This test determines whether the short to ground is due to a short in the wiring or internal to the instrument cluster.
17. This test determines if the malfunction is in the instrument cluster connector.
19. This test determines whether the malfunction is due to an open power feed circuit from the GAUGES Fuse.

Knee Diverter > < Warning Lamp Comes "ON" Steady|Page 4184