isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Door Switch > < Solar Sensor, HVAC|Locations|Page 182
Page 1
background image

Dimmer Switch: Service and Repair

Remove or Disconnect

1. Make sure the headlamp switch is in the OFF position and the ignition switch is in the LOCK position.
2. Instrument panel accessory trim plate. Refer to instrument Panel Accessory Trim Plate Replacement in interior Trim.
3. Electrical connector from the dimmer switch.
4. Screws that retain the headlamp switch panel to the instrument panel accessory trim plate.
5. Headlamp switch panel from the instrument panel accessory trim plate.
6. Instrument panel dimmer switch from the headlamp switch panel.

Install or Connect

1. Instrument panel dimmer switch to the headlamp switch panel.
2. Headlamp switch panel to the instrument panel accessory trim plate.
3. Screws that retain the headlamp switch panel to the instrument panel accessory trim plate.

Tighten
-

Screws that retain the headlamp switch panel to the instrument panel accessory trim plate to 1 N m (9 lb in).

4. Electrical connector to the dimmer switch.
5. Instrument panel accessory trim plate Refer to instrument Panel Accessory Trim Plate Replacement in interior Trim.

Door Switch > < Solar Sensor, HVAC|Locations|Page 182