Hombre XS Space Cab 2WD V6-4.3L (1998)
2. Rotate the clamps until the clamps move freely.
3. Install new bolts and nuts with the correct part number if needed.
Change the length of the tie rods in order to increase or decrease toe-in. Use the threaded sleeve to change the length of the tie rods. When the tie rods
are mounted ahead of the steering knuckle, the rods must be decreased in length to increase toe-in or increased in length to decrease toe-in.
1. Loosen the clamp bolts at each end of the adjustable sleeves of the steering tie rod.
2. Set the steering wheel in the straight ahead position.
3. Turn the tie rod adjusting sleeves in order to obtain the proper toe-in specification.
4. Check the number of threads inside the adjuster sleeve. These must be equal to within three threads.
