Hombre XS Space Cab 2WD V6-4.3L (1998)
Alignment: Specifications
Align:
Caster:
Check ................................................................................................................................................................................................................ 2° ± 1°
Set .......................................................................................................................................................................................................... +2° ± 0.5° (4)
Camber:
Check .......................................................................................................................................................................................................... 0° ± 1° (2)
Set ............................................................................................................................................................................................................ 0° ± 0.5° (1)
Toe-In (Degrees Per Wheel):
Check ................................................................................................................................................................................................ 0.05° ± 0.10° (3)
Set ....................................................................................................................................................................................................... 0.05° ± 0.5° (3)
Total Toe-In:
Check ................................................................................................................................................................................................ 0.10° ± 0.20° (3)
Set ..................................................................................................................................................................................................... 0.10° ± 0.10° (3)
Vehicles must be jounced three times before checking the alignment in order to eliminate a false geometry reading.
-
The left side and the right side to be equal within 0.5°.
-
The left side and the right side to be equal within 1.0°.
-
The steering wheel must be held in the straight ahead position with ± 3.0°. The front individual toe must be equalized relative to the rear wheel
thrust angle.
-
The GVW alignment is the same for all of the vehicles.
Z Trim Height:
Drive Type:
RWD:
Dimensions ................................................................................................................................................... 122.0 mm ± 6.0 mm (4.8 ± 0.2 inch)
Variation* ..................................................................................................................................................................................... 6 mm (0.2 inch)
S4WD:
Dimensions ................................................................................................................... 122.0 mm + 9.0 mm - 6.0 mm (4.8 + 0.4 inch - 0.2 inch)
Variation* ..................................................................................................................................................................................... 6 mm (0.2 inch)
*Acceptable ride variation for both RWD and S4WD vehicles.
D Trim Height
Pickup:
Dimensions ................................................................................................................................................... 131.5 mm to 161.5 mm (5.2 to 6.4 inch)
Variation* ......................................................................................................................................................................................... 30 mm (1.2 inch)
*Acceptable ride variation for pickups.
Wheel Runout:
Wheel Type:
Steel:
Radial ................................................................................................................................................................................... 1.015 mm (0.04 inch)
Lateral ................................................................................................................................................................................ 1.143 mm (0.045 inch)
