isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Handling Electrostatic Discharge|Page 3670 > < Handling Electrostatic Discharge|Page 3668
Page 1
background image

Steering Wheel: Service and Repair
Steering Wheel Horn Contact Replacement

REMOVE OR DISCONNECT  

1. Battery negative cable. 

CAUTION:  Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live"
exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or
components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position
.

2. Disable the SRS. Refer to Disabling the SRS.
3. Inflator module. Refer to Inflator Module Replacement.
4. Steering wheel horn contact from the steering wheel.

INSTALL OR CONNECT 

1. Steering wheel horn contact to the steering wheel.
2. inflator module. Refer to Inflator Module Replacement.  See: Inflator Module Replacement
3. Enable the SRS. Refer to Enabling the SRS. See: Service Precautions
4. Battery negative cable. 

CAUTION:  Before removing or installing any electrical unit or when a tool or equipment could easily come in contact with "live"
exposed electrical terminals, disconnect the negative battery cable to help prevent personal injury and/or damage to the vehicle or
components. Unless instructed otherwise, the ignition switch must be in the "OFF" or "LOCK" position
.

Handling Electrostatic Discharge|Page 3670 > < Handling Electrostatic Discharge|Page 3668