Hombre XS Space Cab 2WD V6-4.3L (1998)
Adjuster Sleeve Slot Orientation
7. Adjuster tube clamp bolts. Before tightening the clamp bolts, make sure the following conditions have been met.
-
The clamps (2) must be positioned between the locating dimples (1) at either end of the adjuster tube.
-
The clamps must be positioned within the angular travel shown.
-
The relationship of the clamp slot (2) with the slot in the adjuster tube (1) must be as shown.
-
Both inner and outer tie rod ends must rotate for their full travel. The position of each tie rod end must be maintained as the clamps are
tightened to ensure free movement of each joint.
-
When clamps are tightened to specifications, the ends may touch (Figure 10).
Tighten
-
Tube clamp bolts to 21 Nm (16 ft. lbs.).
