Hombre XS Space Cab 2WD V6-4.3L (1998)
5. Install the lower link mount bushing. Place a jackstand under the torsion bar support member
6. Install the lower link mount nut.
Tighten
-
Tighten the nut to 68 Nm (50 ft. lbs.).
7. Adjust the torsion bar using the J 36202 or equivalent.
8. Tighten the tool against the adjusting arm for the recorded number of turns. This loads the torsion bars.
9. Install the transmission shield.
10. Lower the vehicle.
11. Check final Z trim height.
