Hombre XS Space Cab 4WD V6-4.3L (1999)
Brake Pedal Assy: Service and Repair
Brake Pedal Replacement
Removal Procedure
1. Remove the steering column support bracket.
2. Remove the brake pedal pivot bolt and discard the bolt.
3. Remove the brake pedal.
4. Inspect the brake pedal pivot bushing for damage or wear.
Installation Procedure
1. If the brake pedal pivot bushing is damage or worn, replace the bushing using the following procedure:
1. Squeeze the end that will be facing the brake pedal pivot nut.
2. Insert the bushing into the pivot hub just enough to hold the bushing in place.
3. Rapidly push the bushing through the hub until the bushing snaps in place.
2. Install the brake pedal.
Important: The brake pedal pivot bolt is a prevailing torque bolt and must be replaced each time the bolt is removed.
3. Install the new brake pedal pivot bolt and the brake pedal pivot nut.
Tighten
Tighten the brake pedal pivot bolt to 25 N.m (19 lb ft).
4. Install the steering column support bracket.