Hombre XS Space Cab 4WD V6-4.3L (1999)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal and Housing Replacement (Housing)
Removal Procedure
Important: Do not remove the crankshaft rear oil seal housing if only replacing the crankshaft rear oil seal.
1. Remove the engine oil pan.
2. Remove the transmission assembly.
3. Remove the engine flywheel.
4. Remove the three bolts and the one nut holding the crankshaft rear oil seal housing to the engine.
5. Remove the crankshaft rear oil seal housing.
6. Remove and discard the crankshaft rear oil seal housing gasket.
7. Clean all sealing surfaces.
8. Inspect the crankshaft rear oil seal housing for warping, cracks, wear, or damage.
Installation Procedure