Hombre XS Space Cab 4WD V6-4.3L (1999)
Stabilizer Bar: Service and Repair
Front
Stabilizer Shaft Replacement (4WD)
Removal Procedure
1. Raise and suitably support the vehicle with safety stands.
2. Remove the tire and wheel.
Important: Remove the parts from the right front and the left front of the vehicle. Keep the parts separated.
3. Remove the link bolt nut.
4. Remove the insulator.
5. Remove the link bolt from the lower control arm.
6. Remove the spacer.
7. Remove the insulator.
8. Remove the stabilizer shaft bracket bolts.
9. Remove the stabilizer shaft brackets.
10. Remove the stabilizer shaft.
11. Remove the stabilizer shaft rubber bushings.
12. Inspect all of the parts for wear or damage.
Installation Procedure
1. Install the insulators to the stabilizer shaft. Face the slit in the insulator forward.
2. Install the stabilizer shaft to the frame and to the lower control arm.
3. Install the brackets to the rubber bushings
4. Install the stabilizer shaft bracket bolts.