i-290 2WD L4-2.9L (2008)
1. Install the lower latch to the rear side access door.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
2. Install the bolts retaining the lower latch to the rear side access door.
Tighten the rear side access door lower latch bolts to 9 N.m (80 lb in).
3. Install the nut retaining the lower latch to the rear side access door.
Tighten the rear side access door lower latch nut to 9 N.m (80 lb in).
4. Connect the lower latch rod (1) to the latch using the retaining clip (2).
5. Install the rear side access door trim panel. Refer to Rear Side Door Trim Panel Replacement (See: Rear Door Panel/Service and Repair/Rear
Side Door Trim Panel Replacement) .
6. Close the rear side access door.