isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Latch Control Assembly Replacement Rear Side Access Door|Page 18381 > < Latch Control Assembly Replacement Rear Side Access Door|Page 18379
Page 1
background image

Rear Door Latch: Service and Repair
Rear Side Access Door Latch Replacement - Upper

Rear Side Access Door Latch Replacement - Upper

Removal Procedure

1. Open the rear side access door.
2. Remove the rear side access door trim panel. Refer to Rear Side Door Trim Panel Replacement  (See: Rear Door Panel/Service and Repair/Rear

Side Door Trim Panel Replacement) .

3. Disconnect the upper latch rod from the latch by releasing the retaining clip.
4. Remove the bolts (1, 2) retaining the upper latch to the rear side access door.
5. Remove the upper latch from the rear side access door.

Installation Procedure

1. Install the upper latch to the rear side access door.

Notice:  Refer to Fastener Notice  (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .

2. Loosely install the lower bolts (2) retaining the upper latch to the rear side access door.

Tighten the lower rear side access door upper latch bolts (2) until the latch bracket is flush to the door panel.

3. Connect the upper latch rod to the latch using the retaining clips.
4. Close the rear side access door to self align the upper latch.
5. Finish tightening the lower rear side access door upper latch bolts.

Latch Control Assembly Replacement Rear Side Access Door|Page 18381 > < Latch Control Assembly Replacement Rear Side Access Door|Page 18379