i-290 2WD L4-2.9L (2008)
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Loose install the vertical bolts retaining the transmission support to the frame.
*
Tighten the horizontal nuts to 50 N.m (37 lb ft).
*
Tighten the vertical bolts to 100 N.m (74 lb ft).
4. Lower the transmission.
5. Install the nuts to the transmission mount. Refer to Transmission Mount Replacement (2WD) (See: Transmission and Drivetrain/Automatic
Transmission/Transaxle/Transmission Mount/Service and Repair) for the 4L60E/4L65E transmission or Transmission Mount Replacement (RPO
Z85 and ZQ8) (See: Transmission and Drivetrain/Manual Transmission/Transaxle/Transmission Mount/Service and Repair) for the Aisin AR5
transmission.
6. Remove the stand or jack.
7. Lower the vehicle.