i-290 2WD L4-2.9L (2008)
3. Push downward on the console to seat the retainers.
4. If the vehicle is equipped with a floor mounted shift lever, install the shift lever bezel and boot.
5. Install the console bolts and if necessary, install the front bucket seat . Refer to Front Seat Replacement - Bucket (See: Seats/Service and
Repair/Front Seat Replacement - Bucket) .
Front Floor Console Armrest Replacement
Front Floor Console Armrest Replacement
Removal Procedure
1. Open the console armrest, revealing the lower compartment.
2. Remove the 3 screws (1) located on the upper hinge.
3. Remove the armrest from the vehicle.
Installation Procedure