i-290 2WD L4-2.9L (2008)
Trim Panel: Service and Repair
Body Hinge Pillar Trim Panel Replacement - Left Side
Body Hinge Pillar Trim Panel Replacement - Left Side
Removal Procedure
1. Remove the left front door sill trim plate. Refer to Front Side Door Sill Plate Replacement (See: Scuff Plate/Service and Repair/Front Side Door
Sill Plate Replacement) .
2. Grasp the left hinge pillar trim panel and gently pull the panel away from the body to release the fasteners.
3. Remove any fasteners that may have pulled away from the panel and reinstall them to the back of the panel.
4. Slide the panel forward so the panel unhooks from around the front door frame.
5. Remove the left hinge pillar trim panel from the vehicle.
Installation Procedure
1. Position the left hinge pillar trim panel over the pillar and door sill.
2. Ensure that the panel fasteners are aligned with the holes in the body.
3. Install the panel by pushing firmly against the body to seat the panel fasteners.
4. Install the left front door sill trim plate. Refer to Front Side Door Sill Plate Replacement (See: Scuff Plate/Service and Repair/Front Side Door Sill
Plate Replacement) .
Body Hinge Pillar Trim Panel Replacement - Right Side
Body Hinge Pillar Trim Panel Replacement - Right Side